• Home
• All tickets
• All wiki pages

Source for wiki FlonumsCowan version 19

author

cowan

comment

ipnr

127.11.51.1

name

FlonumsCowan

readonly

0

text

== Abstract ==

''Flonums'' are a subset of the inexact real numbers provided by a Scheme implementation.  In most Schemes, the flonums and the inexact reals are the same.  

== Rationale ==

Flonum arithmetic is already supported by many systems, mainly to remove type-dispatching overhead. Standardizing flonum arithmetic increases the portability of code that uses it. Standardizing the range of flonums would make flonum operations inefficient on some systems, which would defeat their purpose. Therefore, this SRFI specifies some of the semantics of flonums, but makes the range implementation-dependent.

The sources of the procedures in this SRFI are R7RS-small, [http://srfi.schemers.org/srfi-141/srfi-141.html SRFI 141], [http://www.r6rs.org/final/html/r6rs-lib/r6rs-lib-Z-H-12.html#node_sec_11.3 the R6RS flonum library], and the [http://pubs.opengroup.org/onlinepubs/9699919799/basedefs/math.h.html C99/Posix library] `<math.h>`, which should be available directly or indirectly to Scheme implementers.  (The C90 version of `<math.h>` lacks ``arcsinh``, ``arccosh``, ``arctanh``, ``erf``, and ``tgamma``.)

== Specification ==

It is required that if two flonums are equal in the sense of `=`, they are also equal in the sense of `eqv?`.  That is, if 12.0f0 is a 32-bit inexact number, and 12.0 is a 64-bit inexact number, they cannot both be flonums.  In this situation, it is recommended that the 64-bit numbers be flonums.

Flonum operations must be at least as accurate as their generic counterparts applied to flonum arguments.  It is an error, except as otherwise noted, for an argument not to be a flonum.  In some cases, operations should be more accurate than their naive generic expansions because they have a smaller total roundoff error.  If the generic result is a non-real number, the result is `+nan.0` if the implementation supports that number, or an arbitrary flonum if not.

This SRFI uses ''x, y, z'' as
parameter names for flonum arguments, and ''ix, iy, iz''
as a name for integer-valued flonum arguments, i.e., flonums for which the
`integer?` predicate returns true.

=== Constants ===

The following C99 constants are provided as Scheme variables.

`fl-e`

Value of the mathematical constant ''e''.  (C99 `M_E`)

`fl-log2-e`

Value of `(fllog fl-e 2.0)`.  (C99 `M_LOG2E`)

`fl-log10-e`

Value of `(fllog fl-e 10.0)`.  (C99 `M_LOG10E`)

`fl-ln-2`

Value of `(fllog 2.0)`  (C99 `M_LN2`)

`fl-ln-10`

Value of `(fllog 10.0)`  (C99 `M_LN10`)

`fl-pi`

Value of the mathematical constant π.  (C99 `M_PI`)

`fl-pi/2`

Value of `(fl/ fl-pi 2.0)`  (C99 `M_PI_2`)

`fl-pi/4`

Value of `(fl/ fl-pi 4.0)`  (C99 `M_PI_4`)

`fl-1/pi`

Value of `(fl/ 1.0 fl-pi)`.  (C99 `M_1_PI`)

`fl-2/pi`

Value of `(fl/ 2.0 fl-pi)`.  (C99 `M_2_PI`)

`fl-2/sqrt-pi`

Value of `(fl/ 2.0 (flsqrt fl-pi))`.  (C99 `M_2_SQRTPI`)

`fl-sqrt-2`

Value of `(flsqrt 2.0)`.  (C99 `M_SQRT2`)

`fl-1/sqrt-2`

Value of `(fl/ 1,0 (flsqrt 2.0))`.  (C99 `M_SQRT1_2`)

`fl-maximum`

Value of the largest finite flonum.

`fl-fast-multiply-add`

Equal to `#t` if `(fl+* x y z)` is known to be faster than `(fl+ (fl* x y) z), or `#f` otherwise.  (C99 `FP_FAST_FMA`)

`fl-integer-exponent-zero`

Value of `(flinteger-binary-log 0)`.  (C99 `FP_ILOGB0`)

`fl-integer-exponent-nan`

Value of `(flinteger-binary-log +0.nan)`.  (C99 `FP_ILOGBNAN`)

`fl-radix`

Value of the floating-point radix (2 on most machines).

== Constructors ==

`(flonum `''number''`)`

Returns the closest flonum equivalent to ''number'' in the sense of `=` and `<`.

`(fladjacent `''x y''`)`

Returns a flonum adjacent to ''x'' in the direction of ''y''.  Specifically: if ''x < y'', returns the smallest flonum larger than ''x''; if ''x > y'', returns the largest flonum smaller than ''x''; if ''x = y'', returns ''x''.  (C99 `nextafter`)

`(flcopysign `''x y''`)`

Returns a flonum whose magnitude is the magnitude of ''x'' and whose sign is the sign of ''y''.  (C99 `copysign`)

=== Predicates ===

`(flonum? `''obj''`)`

Returns `#t` if ''obj'' is a flonum and `#f` otherwise.

`(fl= `''x y z'' ...`)`

`(fl< `''x y z'' ...`)`

`(fl> `''x y z'' ...`)`

`(fl<= `''x y z'' ...`)`

`(fl>= `''x y z'' ...`)`

These procedures return `#t` if their arguments are (respectively): equal, monotonically increasing, monotonically decreasing, monotonically nondecreasing, or monotonically nonincreasing; they return `#f` otherwise. These predicates must be transitive.

`(flinteger? `''x''`)‌‌

`(flzero? `''x''`)`

`(flpositive? `''x''`)`

`(flnegative? `''x''`)`

`(flodd? `''ix''`)`

`(fleven? `''ix''`)`

`(flfinite? `''ix''`)`

`(flinfinite? `''ix''`)`

`(flnan? `''ix''`)`

These numerical predicates test a flonum for a particular property, returning `#t` or `#f`. The `flinteger?` procedure tests whether the flonum is an integer, `flzero?` tests whether it is `fl=?` to zero, `flpositive?` tests whether it is greater than zero, `flnegative?` tests whether it is less than zero, `flodd?` tests whether it is odd, `fleven?` tests whether it is even, `flfinite?` tests whether it is not an infinity and not a NaN, `flinfinite?` tests whether it is an infinity, and `flnan?` tests whether it is a NaN.

Note that `(flnegative? -0.0)<` must return `#f`;
otherwise it would lose the correspondence with
`(fl< -0.0 0.0)`, which is `#f`
according to IEEE 754.

=== Arithmetic ===

`(fl+ `''x''`)`

`(fl* `''x''`)`

Return the flonum sum or product of their flonum
arguments.  In general, they should return the flonum that best
approximates the mathematical sum or product.  (For implementations
that represent flonums using IEEE binary floating point, the
meaning of "best" is defined by the IEEE standards.)

`(fl+* `''x y z''`)`

Returns `(fl+ (fl* x y) z)`, possibly faster.  If the constant `fl-fast-fl+*`
is `#f`, it will definitely be faster.  (C99 `fma`)

`(fl- `''x y'' ...`)`

`(fl/ `''x y'' ...`)`

With two or more arguments, these procedures return the 
difference or quotient of their arguments, associating to the
left.  With one argument, however, they return the additive or
multiplicative inverse of their argument.

In general, they
should return the flonum that best approximates the mathematical
difference or quotient.  For undefined quotients, `fl/`
behaves as specified by the
IEEE standards.  For implementations that represent flonums
using IEEE binary floating point, the meaning of "best" is
reasonably well-defined by the IEEE standards.

`(flmax `''x'' ...`)`

`(flmin `''x'' ...`)`

Return the maximum/minimum argument.  If there are no arguments,
these procedures return `+inf.0`/`-inf.0` if the implementation
provides these numbers, and `fl-maximum` / its negation otherwise.

`(flabs `''x''`)`

Returns the absolute value of ''x''.

`(flabsdiff `''x y''`)`

Returns `(flabs (fl- x y))`.  (C99 `fdim`)

`(flsgn `''x''`)`

Returns `(flcopy-sign 1.0 x)`.

`(flnumerator `''x''`)`

`(fldenominator `''x''`)`

Returns the numerator/enominator of ``x``
as a flonum; the result is computed as if <i>x</i> was represented as
a fraction in lowest terms.  The denominator is always positive.  The
denominator of 0.0 is defined to be 1.0.

`(flfloor `''x''`)`

`(flceiling `''x''`)`

`(flround `''x''`)`

`(fltruncate `''x''`)`

These procedures return integral flonums for flonum arguments that are
not infinities or NaNs.  For such arguments, `flfloor` returns the
largest integral flonum not larger than ''x''.  The `flceiling`
procedure
returns the smallest integral flonum not smaller than ''x''.
The `fltruncate` procedure returns the integral flonum closest to ''x'' whose
absolute value is not larger than the absolute value of ''x''.
The `flround` procedure returns the closest integral flonum to ''x'',
rounding to even when ''x'' represents a number halfway between two integers.


Although infinities and NaNs are not integers, these procedures return
an infinity when given an infinity as an argument, and a NaN when
given a NaN.

=== Exponents and logarithms ===

{{{
flexp	double exp(double)	ex
fl2	double exp2(double)	base-2 exponential
flexp-minus-1	double expm1(double)	exp-1
flsquare
flsqrt
flcbrt	double cbrt(double)	cube root
flhypot	double hypot(double, double)	sqrt(x2+y2)
flexp
fl2exp	double ldexp(double x, int n)	x*2n
flexponent	double logb(double x)	the exponent of x, which is the integral part of
log_r(|x|), as a signed floating-point value, for non-zero x, where r is the radix of the machine's floating-point arithmetic
flfraction-exponent	double modf(double, double *)	returns two values, fraction and int exponent
flinteger-exponent	int ilogb(double)	binary log as int
fllog
fllog2	double log2(double)	log base 2
fllog10	double log10(double)	log base 10
fllog+1	double log1p(double x)	log (1+x)
flnormalized-fraction-exponent	double frexp(double, int *)
returns two values, fraction in range [1/2,1) and int exponent
flscalbn	double scalbn(double x, int y)	x*ry, where r is the machine float radix
}}}

The `flsqrt` procedure returns the principal square root of ''x''. For -0.0,
`flsqrt` should return -0.0.

The `flexpt` procedure returns ''x'' raised to the power 'y''
if ''x'' is non-negative or ''y'' is an integral flonum.  If ''x'' is
negative and ''y'' is not an integer, the result may be a
NaN, or may be some unspecified flonum.  If ''x'' is zero, then
the result is zero.

=== Trigonometric functions ===

`(flsin `''x''`)`  (C99 `sin`)

`(flcos `''x''`)`  (C99 `cos`)

`(fltan `''x''`)`  (C99 `tan`)

`(flasin `''x''`)`  (C99 `asin`)

`(flacos `''x''`)`  (C99 `acos`)

`(flatan `''x'' [''y'']`)`  (C99 `atan` and `atan2`)

`(flsinh `''x''`)`  (C99 `sinh`)

`(flcosh `''x''`)`  (C99 `cosh`)

`(fltanh `''x''`)`  (C99 `tanh`)

`(flasinh `''x''`)`  (C99 `asinh`)

`(flacosh `''x''`)`  (C99 `acosh`)

`(flatanh `''x''`)`  (C99 `atanh`)

These are the usual trigonometric functions.  Note that if the result is not a real number, `+nan.0` is returned if available, or if not, an arbitrary flonum.  The `flatan` function, when passed two arguments, returns `(flatan (/ y x))` without requiring the use of complex numbers.
Implementations that use IEEE binary floating-point arithmetic 
should follow the relevant standards for these procedures.

`(flremquo `''x y''`)`

Returns two values, the result of `(flround-remainder x y)` and the low-order ''n'' bits (as a correctly signed exact integer) of the rounded quotient.  The value of ''n'' is implementation-dependent but at least 3.  This function can be used to reduce the argument of the inverse trigonometric functions, while preserving the correct quadrant or octant.


=== Integer division ===

The following procedures are the flonum counterparts of procedures from [http://srfi.schemers.org/srfi-141/srfi-141.html ​SRFI 141]:

{{{
flfloor/ flfloor-quotient flfloor-remainder
flceiling/ flceiling-quotient flceiling-remainder
fltruncate/ fltruncate-quotient fltruncate-remainder
flround/ flround-quotient flround-remainder
fleuclidean/ fleuclidean-quotient fleuclidean-remainder
flbalanced/ flbalanced-quotient flbalanced-remainder
}}}

They have the same arguments and semantics as their generic counterparts,
except that it is an error if the arguments are not flonums.

=== Special functions ===

||Scheme name||C signature||Comments||
||`flcomplementary-error-function`||`double      erfc(double)`||-||
||`flerror-function`||`double      erf(double)`||-||
||`flfirst-bessel`||`double      jn(int n, double)`||bessel function of the first kind, order n||
||`flgamma`||`double      tgamma(double)`||-||
||`fllog-gamma`||`double      lgamma(double)`||returns two values, log(|gamma(x)|) and sgn(gamma(x))||
||`flsecond-bessel`||`double      yn(int n, double)`||bessel function of the second kind, order ''n''||

time

2016-09-15 03:54:37

version

19