This site is a static rendering of the Trac instance that was used by R7RS-WG1 for its work on R7RS-small (PDF), which was ratified in 2013. For more information, see Home. For a version of this page that may be more recent, see TimeAdvancedCowan in WG2's repo for R7RS-large.

Time­Advanced­Cowan

cowan
2014-08-18 07:21:39
28history
source

Date and time arithmetic

This is a WG2 proposal for date and time arithmetic, loosely based on Java's Joda Time functions. It's possible to implement parts of SRFI 19 on top of it, but it provides much more flexibility. See also TimePeriodsCowan.

Issues

  1. Need to do something about ISO 8601 dates like "194902", which don't correspond to a single instant. Extend dates to their first instant (also last instant?).
  1. What about subsecond timing? Specify milli, micro, nano, picoseconds?

Instants

For the purposes of this proposal, an instant is an exact integer representing a particular second of the TAI scale, such that 0 represents midnight on January 1, 1970 TAI (equivalent to ten seconds before midnight Universal Time) and the value 1 represents one TAI second later. The current instant can be obtained more or less accurately by evaluating (round (current-second)).

Chronologies

A chronology is an immutable member of a disjoint type that describes a particular calendar, such as the ISO, Gregorian, Julian, TAI, Jewish, Islamic, Persian, French Revolutionary, Maya, Chinese, Buddhist, Thai, Coptic, Ethiopic, or Martian calendar. The chronologies primitively supported by an implementation are called the base chronologies. Implementations MUST support the ISO chronology, and MAY support any of the other calendars mentioned here, or indeed any calendar not mentioned here. (The ISO chronology is similar to the Gregorian chronology: see the "ISO date fields" section for detailed differences.)

Chronologies also incorporate the concept of time zone. For the ISO chronology (and the Gregorian and Julian chronologies if they are supported), an implementation MUST support the UTC (Universal Coordinated Time) time zone and any time zones expressible as a fixed offset in minutes from UTC. It SHOULD support the historical time zones of the IETF time zone database.

Chronology procedures

(current-chronology)

A parameter representing a chronology used by default. Its initial value should normally represent the user's preferred calendar and current time zone. It can be rebound with parameterize.

(chronology name)

Returns the chronology named by the symbol name. The ISO chronology is named iso. If provided, the Gregorian chronology is named gregorian, the Julian chronology is named julian, and the TAI chronology is named tai. All these chronologies are proleptic (extend into the past before the date they were adopted). The names and behaviors of other chronologies are implementation-dependent. The chronologies returned by this procedure are in the UTC time zone, unless they are meant for planets other than Earth, in which case the nearest equivalent is used. If the name is not known to the implementation, an error that satisfies date-error? is signaled.

(chronology-names)

Returns a list of the symbols naming the chronologies known to the implementation. It is an error to modify this list.

(chronology-name chronology)

Returns the symbol that names chronology.

(chronology-fields chronology)

Returns a list of the symbols naming the possible fields in date objects backed by this chronology (see below). It is an error to modify this list.

(chronology? obj)

Returns #t if obj is a chronology and #f otherwise.

(derive-chronology name [ chronology ] timezone)

Returns a chronology named name (a symbol). The returned value is based on chronology, by default the value of (current-chronology), but using the time zone specified by timezone. In the ISO and Gregorian chronologies, if timezone is an integer, it represents the number of minutes ahead of UTC, but if the implementation supports the tz database, and time-zone is a string containing a time zone name defined by that database, it represents the time zone with that name. Otherwise, the interpretation of timezone is chronology- and implementation-dependent.

(chronology-time-zone chronology)

Returns the time-zone value associated with this chronology. The timezone of the ISO and Gregorian chronologies is 0; the timezone of chronologies derived from them is whatever was passed to derive-chronology.

(make-compound-chronology name chronology1 date chronology2)

Returns a chronology named name (a symbol) that uses chronology1 at all times before date (a date object, see below), and chronology1 for all times including and following date. This is useful for constructing chronologies that transition from Julian to Gregorian or from one timezone to another at a specified date. Compound chronologies may also be constructed by the application, and may or may not have names. The fields available in a compound chronology are the union of those available in the underlying chronologies, but not all fields may be available for all instants.

Date objects

A date object is an immutable member of a disjoint type that provides information about a specific interval of time with respect to a certain chronology. Chronologies are independent of spatial coordinates: no account is taken of relativistic time dilation. For example, at least with respect to the ISO, Gregorian, or Julian chronologies, a date object may represent a specific year, a specific week of a specific year, or an instant in time precise to a second. Date objects have multiple numeric-valued fields such as year or minute-of-day, whose meanings and possible values are determined by the chronology.

Date procedures

(make-date [ chronology ] alist)

Returns a date object using chronology, defaulting to the value of (current-chronology). Alist is an association list that maps symbols which are field names meaningful to chronology to associated numeric values. An error that satisfies date-error? is signaled if the field values are unknown to the chronology, insufficient to specify a particular date object (for example, a month without a year) or mutually inconsistent.

(date? obj)

Returns #t if obj is a date object, and #f otherwise.

(date->alist date)

Returns a newly allocated alist containing the fields of date. Implementations SHOULD provide computed fields as well as explicitly set ones.

(date-field date fieldname)

Returns the numeric value of the field named fieldname (a symbol) within date, or #f if there is no such field. If the specified field was not provided when date was constructed, the value is computed and returned.

(convert-date [ chronology ] date)

Equivalent to (make-date [ chronology ] (date->alist date)), but potentially much more efficient.

(date-update date fieldname value)

Returns a date object based on date, but with the field named fieldname updated to value. An error that satisfies date-error? is signaled if the field is unknown or the value is out of range.

(date-increment date fieldname increment)

Returns a date object which is later than date by increment measured in the units specified by fieldname, or earlier if increment is negative. An error that satisfiesdate-error? is signaled if fieldname is unknown.

For example, (date-increment date 'day-of-month 7) adds seven days to date (which is typically the same as one week, but may be different in some chronologies).

(date-chronology date)

Returns the chronology associated with date.

(date-field-maximum date fieldname)

(date-field-minimum date fieldname)

Returns the maximum or minimum legal value of the field named fieldname in the chronology associated with date. This value is not necessarily the same for all date objects in a particular chronology; for example, 28 is the maximum value of day-of-month if month has the value 2 (February) and year is not a leap year. Returns #f if the value cannot be determined (there is no maximum or minimum year in the ISO chronology, for example).

(date-round date fieldname)

(date-ceiling date fieldname)

(date-floor date fieldname)

(date-truncate date fieldname)

Returns a date object which is the same as date, but adjusted to the nearest integral value of fieldname using the round, ceiling, floor, or truncate functions. This may cause other fields to change their values as well.

ISO date fields

The values of these fields MUST be exact integers. These fields are specified for the ISO, Gregorian, and Julian chronologies, but they may be relevant to other chronologies as well; it is easiest to use a chronology if it supports the standard fields. For interoperability, every chronology must support the instant field. The field names come from Joda Time, and ultimately from ISO 8601.

century
The absolute century of the date. In the ISO chronology, the century of 1965 C.E. is 19, the century of 70 C.E. is 0, and the century of 43 B.C.E. is -1. In the Gregorian and Julian chronologies, they are 20, 1, and -1 respectively, and there is no century 0.
century-of-era
The century of the date's era.
clock-hour-of-day
The hour of the date's day in the range 0-23.
clock-hour-of-half-day
The hour of the date's half-day, in the range 1-12.
day-of-month
The day of the date's month, in the range 1-31 (or less in some months).
day-of-week
The day of the date's week. In the ISO chronology, Monday is day 1 and Sunday is day 7. In the Julian and Gregorian chronologies, Sunday is day 1 and Saturday is day 7.
day-of-year
The day of the date's year, in the range 1-365 in non-leap years and 1-366 in leap years.
daylight-saving-time
1 if daylight saving time (summer time) was in effect, or 0 if not. This field discriminates between 2:00 A.M. daylight time and 2:00 A.M. standard time on the day when daylight saving time ends in the U.S. (and the corresponding periods for other daylight saving time regimes).
era
The date's era. The ISO chronology has just one era. In the Gregorian and Julian chronologies, C.E. (or A.D.) = 1, and B.C.E. (or B.C.) = 0. By convention, the era containing instance 0 is era 1.
half-day-of-day
The half-day (A.M. or P.M.) of this day. A.M. = 0, P.M. = 1.
hour-of-day
The hour of the date's day, in the range 0-23.
hour-of-half-day
The hour of the date's half-day, in the range 0-11.
instant
The instant corresponding to this date.
julian-day
The integral difference in days between this date and noon Universal Time, January 1, 4173 B.C.E. Julian (November 24, 4714 B.C.E. Gregorian).
local-time-offset
The local time zone offset (standard or daylight saving, as the case may be) in minutes ahead of UTC.
minute-of-day
The minute of the date's day, in the range 0-1439.
minute-of-hour
The minute of the date's hour, in the range 0-59.
modified-julian-day
The Julian day minus 2400000.5.
month-of-year
The month of the date's year, in the range 1-12.
second-of-day
The second of the date's day, in the range 0-86399.
second-of-minute
The second of the date's minute, in the range 0-60 (for leap seconds).
standard-time-offset
The standard time zone offset in minutes ahead of UTC.
week-of-week-year
The week of the date's week-year, in the range 1-53.
week-year
The date's week-year, which in the ISO chronology begins on the week that has at least 4 days in the chronological year.
week-year-of-century
The week-year of the date's century. The range is the same as for year-of-century.
year
The absolute year of the date. In the ISO chronology, 43 B.C.E. is -42; in the Gregorian and Julian chronologies, it is -43.
year-of-century
The year of the date's century. In the ISO chronology, the range is 0-99. In the Gregorian and Julian chronologies, the range is 1-100.
year-of-era
The year of the date's era. In the Gregorian and Julian chronologies, the value cannot be 0.

Comparators

date-comparator

A comparator suitable for ordering date objects by their underlying instants.

Exceptions

(date-error obj)

Returns #t if obj is an object signaled by an error as specified above, and #f otherwise.