• Home
• All tickets
• All wiki pages

Source for wiki VectorsCowan version 15

author

cowan

comment

ipnr

127.11.51.1

name

VectorsCowan

readonly

0

text

This is a preliminary list of procedures for the R7RS vector library.  It is an upward compatible extension of the vector libraries of [http://www.schemers.org/Documents/Standards/R5RS/ R5RS], [http://trac.sacrideo.us/wg/raw-attachment/wiki/WikiStart/r7rs.pdf R7RS-small], and [http://srfi.schemers.org/srfi-43/srfi-43.html SRFI 43], with additional procedures that are analogous to procedures in the [http://srfi.schemers.org/srfi-1/srfi-1.html SRFI 1] list library.  As a single exception, the `vector-copy` procedure in R7RS-small does not provide the ''fill'' argument present in SRFI 43.

The procedures that are already in R7RS-small will not be overridden by this library, and are listed only for completeness.

== Notation ==

* R5RS means the procedure is available in R5RS and R7RS-small

* R5RS+ means the procedure is available in R5RS and with additional functionality in R7RS-small and SRFI 43.

* R7RS means the procedure is available in R7RS-small and SRFI 43.

* SRFI 43 means the procedure is available in SRFI 43.

* SRFI 43+ means either the procedure is available in SRFI 43 but additional functionality is proposed (typically ''start/end'' and possibly ''at'' arguments), or an analogous procedure is available in SRFI 43.

* SRFI 1 means an analogous procedure is available in SRFI 1.

== Constructors ==

make-vector (R5RS), vector (R5RS), vector-iota (SRFI 1)  \\
vector-unfold (SRFI 43), vector-unfold-right (SRFI 43) \\
vector-copy (R7RS), vector-copy! (R7RS) \\
vector-reverse-copy (SRFI 43+), vector-reverse-copy! (SRFI 43+) \\
vector-append (R7RS), vector-append! (SRFI 1) \\
vector-append-subvectors (see below) \\
vector-concatenate (SRFI 43), vector-concatenate! (SRFI 1) \\
vector-tabulate (SRFI 1), vector-tabulate! (SRFI 1)

== Predicates ==

vector? (R5RS), vector-empty? (SRFI 43), vector= (SRFI 43+)

== Selectors ==

vector-ref (R5RS), vector-length (R5RS) \\
vector-take (SRFI 1), vector-take-right (SRFI 1) \\
vector-drop (SRFI 1), vector-drop-right (SRFI 1) \\
vector-split-at (SRFI 1)

== Iteration ==

vector-fold (SRFI 43+), vector-fold-right (SRFI 43+) \\
vector-reduce (SRFI 43+), vector-reduce-right (SRFI 43+) \\
vector-map (SRFI 43+), vector-map! (SRFI 43+) \\
vector-for-each (R7RS)

The above procedures do not pass the index value to the mapping function, for compatibility with R7RS `vector-map` and `vector-fold`.  The following versions, which are compatible with SRFI 43, pass the index value as the first argument.

vector-fold-index (SRFI 43+), vector-fold-right-index (SRFI 43+) \\
vector-reduce-index (SRFI 43+), vector-reduce-right-index (SRFI 43+) \\
vector-map-index (SRFI 43+), vector-map-index! (SRFI 43+) \\
vector-for-each-index (R7RS)

== Filtering and partitioning ==

vector-count (SRFI 43+) \\
vector-filter (SRFI 1), vector-remove (SRFI 1), vector-partition (SRFI 1) \\
vector-filter! (SRFI 1), vector-remove! (SRFI 1), vector-partition! (SRFI 1)

== Deleting ==

vector-delete (SRFI 1), vector-delete-duplicates (SRFI 1) \\
vector-delete! (SRFI 1), vector-delete-duplicates! (SRFI 1)

== Searching ==

vector-find (SRFI 1) \\
vector-index (SRFI 43+), vector-index-right (SRFI 43+) \\
vector-skip (SRFI 43+), vector-skip-right (SRFI 43+) \\
vector-any (SRFI 43+), vector-every (SRFI 43+) \\
vector-take-while (SRFI 1+), vector-drop-while (SRFI 1+) \\
vector-binary-search (SRFI 43+) \\
vector-span (SRFI 1), vector-span! (SRFI 1) \\
vector-break (SRFI 1), vector-break! (SRFI 1)

== Mutators ==

vector-set! (R5RS), vector-swap! (SRFI 43) \\
vector-fill! (R5RS+), vector-reverse! (SRFI 43+) \\
vector-copy! (R7RS), vector-reverse-copy! (SRFI 43+)

== Conversion ==

vector->list (R5RS+), reverse-vector->list (SRFI 43+) \\
list->vector (R5RS), reverse-list->vector (SRFI 43) \\
vector->string (R7RS), string->vector (R7RS)

== Additional procedures ==

`(vector-append-subvectors `''k fill'' ( ''at vector start end stride'' ) ...`)`

Returns a newly allocated vector of length ''k'' after copying every ''stride''-th element of each ''vector'' from ''start'' to ''end'' into the new vector starting at ''at''.  Any additional locations in the new vector are initialized with ''fill''.  This procedure is a generalization of `vector-copy` and `vector-copy!`.  Implementations may optimize this procedure using an unsafe primitive that creates an uninitialized vector, in order to avoid touching each element of the result twice. 

`(vector-cumulate `''proc seed vector''`)`

Returns a newly allocated vector of the same length as ''vector''.  Each element is constructed by reducing (as if by `vector-reduce`) successive prefixes of the elements of ''vector''. (APL scan.)

`vector-rotate`

time

2014-12-24 06:34:19

version

15